Skip to main content

Featured Post

Product Design of a 4 wheel differential drive robot

Post a Comment

Getting started with BeagleBone Black (Remote login via SSH with Linux / Windows)

Just started working with beaglebone black Rev C. As I move on with beaglebone black I will keep my blog posted. It may be helpful for newbies like me... :-)

Connect your BBB (BeagleBone Black) with your PC. Open up your terminal and type

ifconfig

to check whether it's connected. You will see an eth1 (ethx) connection with an IP assigned as 192.168.7.1

When you connect your BBB, you will see a drive mounted up (if not mount the disk). Open the drive and open start.htm. You will see documentation of the device there. You can install drivers from there. (Driver installation isn't required, but you might find a few udev rules helpful.) Just download the mkudevrule.sh file. Go to the folder where you download the file. Then give permission to execute the file.

cd ~/Downloads/
chmod +x mkudevrule.sh

Then run it by,

sudo ./mkudevrule.sh

In orded to remotly login to your BBB using ssh type

ssh root@192.168.7.2

There won't be any root password set yet. For windows users download any terminal software like putty. Then try to connect with 192.168.7.2 on port 22.
Labels:

Comments

Post a Comment

Popular posts from this blog

Plymouth theme for Ubuntu

Bored of having the same boot animation screen again and again? There are plenty of Plymouth themes available out there. This is a theme I created by slicing some cool gif files I found online. You can download the theme and find the installation steps on my github account. ( https://github.com/krishnan793/PlymouthTheme-Cat )  The theme is created for Ubuntu 16.04. But this can be installed on previous versions with slight modification. If you have a slow computer then you can watch the whole animation loops. (The VM I used to record the screen was fast though. :))
Post a Comment
Read more

Remote access your BeagleBone Black using vnc

Before going into how to share desktop with your BBB I assume you have a proper ssh access to your BBB. (through USB) (if not read this ) Also this tutorial is for BBB with Debian installed (type cat /etc/*-release to know which distro you are currently using. Or refer here ) First install the vnc server in BBB.(After logging into BBB) ssh root@192.168.7.2 apt-get install x11vnc Then go to your local computer and open a terminal window. Install a vnc viewer like vinagre. sudo apt-get install vinagre Now its time to start vnc server in BBB. x11vnc -auth /var/run/lightdm/root/:0 -forever This will start a vnc server at port 5900. Note this server setup is temporary. If you want to remotely connect to your BBB after a reboot type the above command again. Go to your local computer and type  vinagre 192.168.7.2::5900 A remote desktop will be shown if all goes well. Try exploring other options in x11vnc using (in BBB) man x11vnc The se
Post a Comment
Read more

Product Design of a 4 wheel differential drive robot

I have been thinking of creating a small mobile robot from scratch. From scratch means, go through all the steps of a product development. Design the overall architecture, design the circuits, make 3D model of the parts, 3D print the parts and finally integrate with ROS. The methods I followed may not be the best practice. The only aim is to reach from idea to actual product (prototype). Features: 4 Wheel Differential Drive Camera WiFi IMU GPS(optional) Overview A 4 wheeled differential mobile robot with wheel encoders, camera, WiFi, IMU and GPS(optional). The first thing I did was to come up with an overall architecture. Raspberry pi 3 will be the heart of the robot. Pi Zero was considered in the beginning, but eventually had to  change because of the lack of support for ROS. Even though able to compile ROS from scratch, it became so hard to compile other packages needed for the project. Since I do not want to use pi to directly control motors, I had to design a
Post a Comment
Read more